- Myphone Agua Rio Fun V1 Firmware Free Download
- Myphone Agua Rio Fun V1 Firmware Reset
- Myphone Agua Rio Fun V1 Firmware Manual
- Myphone Agua Rio Fun V1 Tested Firmware
MyPhone V1 Stock Rom Firmware Flash File
This is the MyPhone V1 Official Stock ROM that can be using SP Flashtool to fix some common software problem lite; Bootloop, Stuck on logo, Infected Virus, Deadboot and others.
Important To Read Before Flash MyPhone V1
Download the UPDATE v1.2 and place it to your phone's SD card storage 2. Reboot your phone to Recovery mode (CWMR or TWRP) 3. Install Zip from SD card 4. Choose Zip from SD card, select the 'UPDATED v1.2' that you have downloaded. Select YES to Install 8. Wait until its through 9. Credits: XDA, MyPhone Groups, Edmhar Laoag, Red.
Myphone Agua Rio Fun V1 Firmware Free Download
Flashing new firmware will delete all your user data, including contacts, messages, photos and other third party installed apps where installed and saved in internal storage. Performing backup first is highly recommended. The following are the common software problem that can be fix through flashing new firmware;
- MyPhone Agua Rio Fun Firmware Download Link Download This: MyPhone Agua Rio Fun Firmware password: myphoneasp2013 Sp Flash Tools. Oppo Neo 5 1201 16GB Firmware Download Link Below is the download link of Oppo Neo 5 1201 16GB Firmware which you can use for restoring your smartphone in any case that you get into.
- Hi I made this tutorial to help those who are 'bootloop' in myphone rio fun V2 Kitkat. I wrote this blog to help you how to restore your backup using CTR 2.2 that works in Rio Fun V2 Kitkat. This Tricks are inclusive for those who has CTR only. I ported CTR 2.2 for kitkat.
- First of all, create a folder on your desktop & extract all the files on your system. Install the MT65xx Preloader driver. Open the SP Flash tool folder & run the flashtool.exe. Browse the scatter file from the Myphone Agua Rio stock ROM folder. Click Download button.
- MyPhone AGUA RIO FUN / CRAZE HANG on BOOT Solution Firmware Flashing. Firmware for V.1 & V.2. FLASH AGUA RIO FUN v1 flashing trick.
- Infected Virus – Also known as Monkey Virus where when you connect to Internet, there is automatically download apps or some popup screen and sometimes automatically turn on WiFi or data connection without doing it. The virus will not remove though hard reset or formatting your phone. Installing new firmware is the best solution.
- Unfortunately Error – This is when you open some apps it will popup Unfortunately, App has stopped. If cannot fixed through clearing the data, then flashing new firmware is also the solution.
- Stuck or Hang in Logo – The reason for this is either when you install incorrect Rom. Try to hard reset first but if still stuck, then flashing firmware is also the solution
- Too Many Pattern Attempts or forgot password – This is just an alternative solution if you cannot hard reset your android phone.
- Dead boot – Another caused of flashing incorrect ROM will lead to dead boot. Make sure you are flashing the right ROM (Firmware) for your Phone. If you think below is the right firmware for your device then nothing to worry.
- Boot Loop – The device keep rebooting when you turned it on, Unless your power switch has been damage, Flashing new ROM will fix it.
- And any software problem.
Myphone Agua Rio Fun V1 Firmware Reset
Initial Steps to Install Firmware MyPhone V1
Download and install MTK Android USB drivers
Download And Install SP Flash Tool
How To Flash MyPhone V1
- First, you need to download and install SP flash tool
- Download and install MTK Android USB drivers
- Then download Firmware file/Flash file/ROM for your phone
- Your phone must have 50 % charging before this process,
- switch off your mobile remove the battery (if removable) reinsert the battery and plug the USB cable in charging socket
- Now open SP flash tool.exe
- When SP flash tool open, go to download button in SP flash tool
- In download tab, click on scatter load button
- After locating the scatter tab, click on the download button
- Now connect your smartphone with a USB cable and press volume up or volume down key for easy detection (remove and re-insert your phone battery if it is removable)
- Now flashing is completed, a green ring will appear in SP flash tool
- Close SP flash tool on your computer and unplug phone
- Power on the phone and enjoy
- After flashing process, starts, it might take up to 5-10 minutes. So, keep patience and wait.
Disclaimer: Don't flash another preloader and DSP_BL blocks! It is always dangerous! On some models of phones you will have a brick even if you download these blocks read from a phone which you own! Always remove from them marks in SPFT! ALWAYS have a working backup of your original ROM before you flash a new unknown ROM. NKH take no responsibility for any harm done while attempting this!
1. Download USB Drivers For Android Install On Your Computer If Your Computer Already has USB Drivers Installed Just Skip This Step.
2. Switch Off Your Android Device & Remove The Battery If Battery is Removable.
3. Download Stock Firmware or Any Custom Rom Which Your Want to Flash On Your device The ROM or FIRMWARE on your Computer.
4. Download & Install SP Flash Tool on your Computer After EXTRACTING you will Get These Following files..
5. Now Run The Smart Phone Flash Tool.exe You Will Get This Form File in Extracted Files.
6. Once SP Smart Tool is Start..Now Click on the DOWNLOAD TAB.
7. In Download Tab Option..just Click on Scatter-Loading Button.
8. Now..Locater The File Scatter File ( The Scatter File Included in Stock Rom Folder).
Myphone Agua Rio Fun V1 Firmware Manual
9. Now Press On DOWNLOADBUTTON Option For Start The Flash Process.
10. Now Connect Your Android Device to Computer Using Via USB Cable(Without Battery..If Your Phone Battery is Removable).After Connect your Device via Computer now Press Volume Down & Volume Up Key, So Your Computer is Easily Detect your Android Phone.
11. Once Flashing Process is Completed, A Green Ring Sign will Appear.
Just Close The SP Flash Tool & Disconnect your Android Device From The Laptop or Computer.
CONGRATS YOUR ANDROID DEVICE IS SUCCESSFULLY RUNNING ON LATEST ANDROID FIRMWARE WHICH YOU DOWNLOADED
Download MyPhone V1 Firmware
Myphone Rio Fun stock ROM (Jellybean) V1
Myphone Rio fun stock ROM (KitKat) V2
7. In Download Tab Option..just Click on Scatter-Loading Button.
8. Now..Locater The File Scatter File ( The Scatter File Included in Stock Rom Folder).
Myphone Agua Rio Fun V1 Firmware Manual
9. Now Press On DOWNLOADBUTTON Option For Start The Flash Process.
10. Now Connect Your Android Device to Computer Using Via USB Cable(Without Battery..If Your Phone Battery is Removable).After Connect your Device via Computer now Press Volume Down & Volume Up Key, So Your Computer is Easily Detect your Android Phone.
11. Once Flashing Process is Completed, A Green Ring Sign will Appear.
Just Close The SP Flash Tool & Disconnect your Android Device From The Laptop or Computer.
CONGRATS YOUR ANDROID DEVICE IS SUCCESSFULLY RUNNING ON LATEST ANDROID FIRMWARE WHICH YOU DOWNLOADED
Download MyPhone V1 Firmware
Myphone Rio Fun stock ROM (Jellybean) V1
Myphone Rio fun stock ROM (KitKat) V2